 |
|
Unitech MS120 Barcode Scanners
Other products from Unitech
The MS120 Series Bar Code Wands are targeted toward low reading volume and cost effective solutions. The advanced optics and electronic design convert bar code labels into a high quality digital signal. Able to read color faded and low contrast barcodes quickly and accurately the MS120 is a proven solution. The polished sapphire tip reduces wear on labels and is also easily replaced if damaged. The MS120 is available with three different interfaces. The MS120A is an undecoded model which interfaces via a 9-Pin squeeze release connector. The MS120-2 has an RS232 interface with a built-in decoder. With a key-board wedge (AT or PS-2) interface the MS120-3 also has a built-in decoder. It's shape gives the MS120 the comfort and handling of a normal ink pen. Just sweep the tip of the wand across the bar code in either direction and listen for the "good read" beep that lets you know the data has been successfully captured. It doesn't get any easier than that.
- Durable, replaceable saphire tip
- Easy to use and configure
- High scan speed (5 ~ 200 cm/sec)
- Keyboard wedge and RS232 interfaces available
- Low power consumption
- Rugged, lightweight design
- Wide read angle (0 ~ 45 degrees)
|
View MS120 Accessories 
| Item# |
Description |
Sale Price |
| MS120-3 |
MS120, Keyboard wedge, with DIN connector |
$93.00
|
| MS120-3PS2 |
MS120, Keyboard wedge, with PS/2 mini-DIN connector |
$93.00
|
| MS120A |
MS120, undecoded, with DB-9 squeeze and release connector |
$53.00
|
| MS120-2 |
MS120, RS-232, with DB-9 connector. Order power supply separately (Part# 101000-0150), see accessories. |
$93.00
|
| MS120-3PS2G |
MS120, Pen Scanner (Stainless Steel Wand with Keyboard wedge Interface and PS-2 Cable) |
$86.10
|
| MS120AG |
MS120, Pen Scanner (Stainless Steel Wand, with DB-9-Female Squeeze Release Connector) |
$42.70
|
| MS120 |
MS120, Stainless Steel Wand, with DIN Connector, 660nm red LED, 2 - 78.7 inches/sec scan rate |
$48.80
|
| MS120AG-ST |
MS120, Stainless Steel Wand, with 9 pin squeeze TTL Interface, 660nm red LED, 2 - 78.7 inches/sec scan rate |
$57.40
|
| MS120-T |
MS120, Replacement Wand Tip for the MS120 Pen Scanner |
$16.70
|
Accessories
| Item# |
Description |
Sale Price |
| PW201-3 |
USB Adapter Cable (PS/2 Scanner to USB) |
$29.80
|
| 1550-201423 |
USB Cable for MS830 |
$27.40
|
| 101000-0150 |
110V power supply/AC adapter for RS-232 interface. Not for MSR206. See (Part# 3290001000). |
$20.40
|
| 1550-210435 |
PS2-AT-XT Y Cable for Keyboard wedge for MS830 |
$21.60
|
| MS201 |
Stand for 3 inch CCD Scanner - MS265 and MS210 |
$21.60
|
| 1550-201596 |
HHLC and Wand Emulation Interface Cable (Black) for the MS210, MS265, MS300, MS331, MS690 and MS830 |
$21.60
|
| 1010-600889 |
A/C Adapter for RS-232 Scanner, 220V AC to 5V DC |
$21.60
|
| PW201-5 |
USB Adapter Cable (MAC/ADB port Scanner to USB) |
$29.60
|
| MS203 |
Hands free Stand for MS690WA |
$30.90
|
| 5200-381024 |
Handsfree Stand for MS830 |
$22.80
|
Unitech MS120 Details
Features:
- Rugged, lightweight design.
- Easy to use and configure.
- Low power consumption.
- Wide read angle (0 ~ 45°).
- High scan speed (5 ~ 200 cm/sec).
- Durable, replaceable saphire tip.
- Keyboard wedge and RS232 interfaces available.
- 1 year warranty
The MS120 series barcode wands are targeted toward low reading volume and cost effective solutions. The advanced optics and electronic design convert barcode labels into a high quality digital signal. Able to read color, faded and low contrast barcodes quickly and accurately, the MS120 is a proven solution. The polished sapphire tip reduces wear on labels and is also easily replaced if damaged. The MS120 is available with three different interfaces. The MS120A is an undecoded model which interfaces via a 9pin squeeze release connector. The MS120-2 has an RS232 interface with a built in decoder. With a key-board wedge (AT or PS/2) interface the MS120-3 also has a built-in decoder. Its shape gives the MS120 the comfort and handling of a normal ink pen. Just sweep the tip of the wand across the barcode in either direction and listen for the "good read" beep that lets you know the data has been successfully captured. It doesn't get any easier than that.
|
