Intermec IP3 RFID Readers

Other products from Intermec

Physical Description
The IP3 RFID reader handle is a snap-on, high-impact plastic and magnesium trigger handle accessory that adds the capability to read and to write to Intellitag RFID tags to all Intermec 700 Series Color Mobile Computers.

Physical Characteristics
Weight without 700 Series Color: .48 kg with battery (1.1lbs)Weight with 700 Series Color: 1.04 kg with battery (2.3 lbs). Additional batteries weigh 68 gm (2.4 oz).

Standard Features
Communications Interface: Infrared data connection to 700 Color

Antenna
Internal, circularly polarized

Identify, Read & Write Examples*
Configured for U.S. FCC Part 15 operation at a distance of 50% of the maximum read range. Identifies up to 6 tags per second. The reader can retain up to 100 tag ID's in volatile memory. Reads a tag (8 bytes of data) within 12 ms Performs a verified write at an average rate of 31ms per byte, per tag.

Range Performance Examples*
With FCC unlicensed operation scanner/programmer and dual antenna configuration. Writes up to 70% of read range. UHF -- Reads at 1.5 meters with a single antenna and 105-mm tag.

*Rates and ranges will vary by tag spacing, movement, mounting surface, surrounding materials, and orientation.

Power
Removable Lithium–ion battery pack

Accessories
External battery charger

Environment
Operating Temperature: -20°C to 55°C (-4°F to 131°F)
Storage Temperature: -40°C to 70°C (-40°F to 158°F)
Humidity: 10 to 95% (non-condensing)
Shock: 20 G, 11ms, half sine pulse (operating)
Vibration: 1.0 GRMS. 10 to 500Hz, 3 axis (operating)

The individual packaging will be designed to pass National Safe Transit Association (NSTA) Procedure Project 1A.

Standards
AIAG B-11
ANS INCITS 256:1999 (R2001) - Parts 2, 3.1 & 4.2
ANSI MH10.8.4
ISO/IEC CD18000 Part 4
ISO/IEC WD18000 Part 6

Restrictions On Use
Some approvals and features may vary by country and may change without notice.