 |
|
O'Neil LP3 Specifications
|
O'Neil LP3 Specifications |

|
|
| Additional Information |
O'Neil LP3 Data Sheet |
| O'Neil-LP3-Description | O'Neil-LP3-Pricing |
|
|
O'Neil LP3 Specifications
- Physical Characteristics
- Dimensions:
- 6.2" x 5.17" x 7.86"
(15.7 x 13.1 x 20 cm)
- Weight (printer only):
- Weight (printer batteries & paper roll):
- Drop Specifications:
- User Environment
- Operating Temperature:
- -4° F to 122° F (0°C to 50°C)
- Storage Temperature:
- -40° to 158° F(-40° C to 70° C)
- Charging Temperature:
- -41° to 104° F (-5° C to 40 ° C)
- Relative humidity:
- 10% to 90% non-condensing
- ESD Protection:
- Communications
- Serial:
- RS-232, up to 115.2k baud
- Wireless LAN:
- Cisco® Aironet® 350 Series PC Card (PCMCIA)
Symbol® Spectrum24® LA 4121 (PCMCIA)
- Frequency Band:
- Data Rates:
- Network Standard:
- Network Architecture Types:
- Infrastructure and ad hoc
- Wireless Medium:
- Direct Sequence Spread Spectrum (DSSS)
- Authentication:
- Encryption:
- None, 40 bit, 128 bit WEP
- DHCP:
- DNS:
- Wireless PAN:
- Integrated Bluetooth® module
- Network Environment
- Ad hoc or piconet network environments
- Protocol
- Supports version 1.1 and 1.2 of the Bluetooth
standard (SIG certified)
- Print Technology
- Printhead:
- 576 dots across,203.2 dpi (8 dots/mm)
- Printhead Life:
- Pulse Life 1 x 108 pulse, Abrasion Life 50 km
- Print Speed:
- Width:
- Media
- Type:
- Linered labels and direct thermal paper
- Capacity:
- 3.5" maximum roll diameter
1" inner core diameter
- Width:
- Power Source
- Battery :
- 7.2V Lithium-lon (Li-lon),2200 mAh
(two batteries for a total of 4400 mAh)
- DC Input :
- 12-15V,built-in spike and surge protection
- Battery Characteristics
- Type:
- 7.2V Lithium-lon (Li-lon), 2200 mAh (two batteries
for total 4400 mAh)
- Endurance
- Radio Ready:
- Prints approx. 1,400 - 3" x 2.5" labels on a
single battery charge
- Bluetooth:
- Prints approx. 1,430 - 3" x 2.5" labels on a
single battery charge
- 802.11b:
- Prints approx. 1,180 - 3" x 2.5" labels on a
single battery charge
- Battery Life:
- 56% of original capacity after 500 cycles
- Recharging:
- 4-5 hours from AC adapter or cigarette lighter adapter
LED indicator for charging status
- Fonts & Languages
- Memory Capacity:
- 16Mb Flash/4Mb Ram, 1.6 MB Free for fonts/graphics
- Standard Fonts:
- 5.5CPI, 7.2CPI, 10.2CPI,10.7CPI, 15.6CPI, 18.5CPI, 20.4CPI,
22.6CPI & 34.0CPI (additional fonts available)
- International Characters:
- Arab-T, Arab-S, Arab-E,Asian-A, Asian-B, ShiftsJIS, Greek,
OCRA, OCRB, Unicode subset including Latin & Thai
(additional international characters available)
- Bar Codes:
- Prints 1D and 2D bar codes
- Graphics:
- Supports storage of graphics/logos in Flash memory and
transient "print once" graphics
- User Interface
- Power Button:
- Power button turns printer on and off and has an LED
indicator for power status
- Battery Gauge:
- Battery Gauge indicates battery life when power is on,
charging status when charging, as well as charging errors
in red, orange and green
- Feed Button:
- Feed buttons feeds media forward to next top of form and
indicates paper/sensor errors in red
- Radio Button:
- Manual button for on/off. Flashing blue light indicates radio
signal strength. Solid red warming light for "out of range"
- Agency Approvals
- FCC B, CE, C-Tick, SAE-J1113-11,E-Mark
- Warranty
- 1 year (including printer case and printhead*)
- Option / Accessories
|
|
- Data Cables for Hand-Held Devices
|
|
|
|
- Cigarette Lighter Adapter
|
- Dual External Battery Charger
|
|
|
|
|
|
|
|
|